The Lake Country SDO Black Finishing Foam Pad is the finishing pad in Lake Country's Standard Duty Orbital (SDO) line, made for random orbital DA polishers. Use it as the final polishing step for maximum gloss, and on its own to remove the finest holograms.
Video Demonstration
Key Features & Benefits
🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive of the three SDO foam pads.
🔹 Removes Fine Holograms – Lake Country notes that some holograms are fine enough to be removed by its black SDO finishing pad alone.
🔹 Same Foams as HDO – Lake Country builds SDO pads with the same engineered foams as its HDO line, without the HDO dual-layer construction.
🔹 Center Ventilated Cooling Chamber – The center hole works as a tunnel to release heat from the foam, lowering surface temperatures and increasing pad durability.
🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating, which helps on curved and contoured panels.
How to Use
Step 1: Complete any cutting or polishing steps first, then wipe the panel clean so leftover compound doesn't contaminate the finishing step.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Lake Country designs SDO pads for random orbital DA polishers with a center-ventilated backing plate. Center the pad on the plate.
Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.
Step 4: Work one small section at a time with slow, overlapping passes and light, even pressure, keeping the pad flat.
Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.
Pro Tip: Keep a dedicated set of black pads for finishing only. Using them with heavier compounds can leave residue in the foam that works against a clean final finish.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The finishing step is where a correction job looks finished. The SDO Black gives standard DA users Lake Country's HDO-grade finishing foam, with a center-vented chamber that keeps it cool and a tapered edge that keeps it rotating on curves.
Works Best With
✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.
✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.
✅ Lake Country SDO Orange Polishing Pad – The polishing pad in the same SDO line, for the step before finishing.
✅ Lake Country SDO CCS Black Finishing Pad – The CCS version of this pad, for longer working time with each application.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How does the Black compare to the other SDO pads?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing. Black is the least aggressive and is used for final refinement.
❓ Question: Will it remove swirls?
💡 Answer: It can remove the finest holograms on its own. For typical swirl marks, Lake Country recommends its orange SDO foam first, with the black pad to finish.
❓ Question: How is SDO different from HDO?
💡 Answer: Both use the same foams. HDO pads add a dual-layer construction with a thinner dense layer under the working foam, designed for the demands of long-throw polishers. SDO pads are Lake Country's standard orbital option for DA polishers.
❓ Question: What backing plate do I need?
💡 Answer: A center-ventilated plate, sized 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch. The pad should always be at least as large as the plate.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: Center-ventilated; 3.5" pad fits a 3" plate, 5.5" fits 5", 6.5" fits 6"
🛠 Material: Engineered foam with center ventilated cooling chamber and tapered edge
🚗 Application Type: Finishing
⚙️ Machine Compatibility: Random orbital DA, forced DA, and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country SDO Black Finishing Foam Pad is the finishing pad in Lake Country's Standard Duty Orbital (SDO) line, made for random orbital DA polishers. Use it as the final polishing step for maximum gloss, and on its own to remove the finest holograms.
Video Demonstration
Key Features & Benefits
🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive of the three SDO foam pads.
🔹 Removes Fine Holograms – Lake Country notes that some holograms are fine enough to be removed by its black SDO finishing pad alone.
🔹 Same Foams as HDO – Lake Country builds SDO pads with the same engineered foams as its HDO line, without the HDO dual-layer construction.
🔹 Center Ventilated Cooling Chamber – The center hole works as a tunnel to release heat from the foam, lowering surface temperatures and increasing pad durability.
🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating, which helps on curved and contoured panels.
How to Use
Step 1: Complete any cutting or polishing steps first, then wipe the panel clean so leftover compound doesn't contaminate the finishing step.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Lake Country designs SDO pads for random orbital DA polishers with a center-ventilated backing plate. Center the pad on the plate.
Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.
Step 4: Work one small section at a time with slow, overlapping passes and light, even pressure, keeping the pad flat.
Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.
Pro Tip: Keep a dedicated set of black pads for finishing only. Using them with heavier compounds can leave residue in the foam that works against a clean final finish.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The finishing step is where a correction job looks finished. The SDO Black gives standard DA users Lake Country's HDO-grade finishing foam, with a center-vented chamber that keeps it cool and a tapered edge that keeps it rotating on curves.
Works Best With
✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.
✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.
✅ Lake Country SDO Orange Polishing Pad – The polishing pad in the same SDO line, for the step before finishing.
✅ Lake Country SDO CCS Black Finishing Pad – The CCS version of this pad, for longer working time with each application.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How does the Black compare to the other SDO pads?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing. Black is the least aggressive and is used for final refinement.
❓ Question: Will it remove swirls?
💡 Answer: It can remove the finest holograms on its own. For typical swirl marks, Lake Country recommends its orange SDO foam first, with the black pad to finish.
❓ Question: How is SDO different from HDO?
💡 Answer: Both use the same foams. HDO pads add a dual-layer construction with a thinner dense layer under the working foam, designed for the demands of long-throw polishers. SDO pads are Lake Country's standard orbital option for DA polishers.
❓ Question: What backing plate do I need?
💡 Answer: A center-ventilated plate, sized 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch. The pad should always be at least as large as the plate.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: Center-ventilated; 3.5" pad fits a 3" plate, 5.5" fits 5", 6.5" fits 6"
🛠 Material: Engineered foam with center ventilated cooling chamber and tapered edge
🚗 Application Type: Finishing
⚙️ Machine Compatibility: Random orbital DA, forced DA, and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.