The Lake Country HDO CCS Orange Polishing Pad combines Lake Country's Heavy Duty Orbital (HDO) design for long-throw polishers with its patented CCS foam technology. It's the middle pad in the HDO CCS line, for swirl removal and general polishing, with CCS pockets that help the pad hold and release polish.

Video Demonstration

Key Features & Benefits

🔹 Polishing Foam – Lake Country rates orange as Polishing, between the Blue Heavy Polishing and Black Finishing pads in the HDO CCS line.

🔹 CCS Technology – Conventional foam pads absorb polish too quickly, trapping most of it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells to slow that absorption.

🔹 Gradual Polish Release – CCS pockets release polish gradually as you work, extending working time and improving control.

🔹 Prevents Pad Skipping – The pockets reduce surface tension and friction so the pad runs flat on the paint, with less friction heat.

🔹 Dual-Layer HDO Design with Tapered Edge – The dual-layer construction reduces internal movement, and the tapered edge resists pad rolling on curved and contoured panels.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat so it keeps rotating.

Step 5: Wipe off residue with a clean microfiber towel and inspect. If you want more gloss, finish with the HDO CCS Black pad.

Pro Tip: Because CCS pads release product gradually, start with less polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

The orange pad is the one most jobs start with. The HDO CCS Orange pairs the long-throw HDO design with CCS foam that keeps polish working at the surface, so you get a longer working cycle from each application. Lake Country suggests CCS on its HDO foam pads when you want them to hold more compound and give longer working times.

Works Best With

✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A 15mm long-throw orbital polisher. Pair it with the 5.5-inch pad.

✅ Rupes BigFoot Mini 3" Random Orbital Polisher – A mini polisher with a 3-inch backing plate for tight areas. Pair it with the 3.5-inch pad.

✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.

✅ Lake Country HDO CCS Black Finishing Pad – The HDO CCS finishing pad, for the final step.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: What does CCS do?
💡 Answer: CCS uses patterns of partially closed foam cells that slow how quickly the pad absorbs polish, release it gradually as you work, help the pad run flat without skipping, and reduce friction heat.

❓ Question: How is this different from the standard HDO Orange foam pad?
💡 Answer: Both share the HDO dual-layer, tapered design for long-throw polishers. The CCS version adds CCS cell technology for slower polish absorption and longer working time.

❓ Question: How does the Orange compare to the other HDO CCS colors?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Dual-layer CCS foam with tapered edge

🚗 Application Type: Polishing

⚙️ Machine Compatibility: Long-throw orbital, random orbital DA, and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Sale

LAKE COUNTRY HDO CCS Orange Light Cutting Pad

SKU: HDO-23350-CCS-LC
Regular price $9.99
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country HDO CCS Orange Polishing Pad combines Lake Country's Heavy Duty Orbital (HDO) design for long-throw polishers with its patented CCS foam technology. It's the middle pad in the HDO CCS line, for swirl removal and general polishing, with CCS pockets that help the pad hold and release polish.

Video Demonstration

Key Features & Benefits

🔹 Polishing Foam – Lake Country rates orange as Polishing, between the Blue Heavy Polishing and Black Finishing pads in the HDO CCS line.

🔹 CCS Technology – Conventional foam pads absorb polish too quickly, trapping most of it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells to slow that absorption.

🔹 Gradual Polish Release – CCS pockets release polish gradually as you work, extending working time and improving control.

🔹 Prevents Pad Skipping – The pockets reduce surface tension and friction so the pad runs flat on the paint, with less friction heat.

🔹 Dual-Layer HDO Design with Tapered Edge – The dual-layer construction reduces internal movement, and the tapered edge resists pad rolling on curved and contoured panels.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat so it keeps rotating.

Step 5: Wipe off residue with a clean microfiber towel and inspect. If you want more gloss, finish with the HDO CCS Black pad.

Pro Tip: Because CCS pads release product gradually, start with less polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

The orange pad is the one most jobs start with. The HDO CCS Orange pairs the long-throw HDO design with CCS foam that keeps polish working at the surface, so you get a longer working cycle from each application. Lake Country suggests CCS on its HDO foam pads when you want them to hold more compound and give longer working times.

Works Best With

✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A 15mm long-throw orbital polisher. Pair it with the 5.5-inch pad.

✅ Rupes BigFoot Mini 3" Random Orbital Polisher – A mini polisher with a 3-inch backing plate for tight areas. Pair it with the 3.5-inch pad.

✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.

✅ Lake Country HDO CCS Black Finishing Pad – The HDO CCS finishing pad, for the final step.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: What does CCS do?
💡 Answer: CCS uses patterns of partially closed foam cells that slow how quickly the pad absorbs polish, release it gradually as you work, help the pad run flat without skipping, and reduce friction heat.

❓ Question: How is this different from the standard HDO Orange foam pad?
💡 Answer: Both share the HDO dual-layer, tapered design for long-throw polishers. The CCS version adds CCS cell technology for slower polish absorption and longer working time.

❓ Question: How does the Orange compare to the other HDO CCS colors?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Dual-layer CCS foam with tapered edge

🚗 Application Type: Polishing

⚙️ Machine Compatibility: Long-throw orbital, random orbital DA, and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.