The Lake Country Force White Polishing Pad is the polishing pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it to refine paint after cutting, or on its own for light polishing.
Video Demonstration
Key Features & Benefits
🔹 Polishing Foam – Lake Country rates this pad as Polishing, the middle of the five Force pads, between Orange Cutting and Black Finishing.
🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.
🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.
🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Attach the 6.5-inch pad, centered, to a 6-inch hook-and-loop backing plate.
Step 3: Prime the pad with a light, even coat of polish across the face, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes and even pressure.
Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with a Force Black pad for maximum gloss.
Pro Tip: Because Force foam keeps product at the surface, a small amount of polish goes a long way. Add more only when the pad starts to run dry.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The White sits in the middle of the Force line, so it's the pad that turns a corrected panel into a polished one. Its dense hybrid foam keeps polish working at the surface on forced-rotation machines.
Works Best With
✅ Rupes Uno Advanced – A fine-cut polish for light correction in one step, or as the second step after compounding.
✅ Sonax Perfect Finish – A finishing polish with modest cut that refines paint to a high gloss.
✅ Lake Country Force Black Finishing Pad – The next Force pad down, for final finishing after the White.
✅ Lake Country Force White Polishing Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.
❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.
❓ Question: What sizes do you stock?
💡 Answer: We carry the Force White in 6.5 inch, which fits a 6-inch backing plate, plus the 1-inch and 2-inch micro pads.
Technical Specifications
📏 Pad Size: 6.5" diameter (5-pack, 10-pack, and 24-pack)
🔧 Backing Plate: 6" plate
🛠 Material: Force hybrid foam with buff-backed design
🚗 Application Type: Polishing
⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Force White Polishing Pad is the polishing pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it to refine paint after cutting, or on its own for light polishing.
Video Demonstration
Key Features & Benefits
🔹 Polishing Foam – Lake Country rates this pad as Polishing, the middle of the five Force pads, between Orange Cutting and Black Finishing.
🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.
🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.
🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Attach the 6.5-inch pad, centered, to a 6-inch hook-and-loop backing plate.
Step 3: Prime the pad with a light, even coat of polish across the face, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes and even pressure.
Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with a Force Black pad for maximum gloss.
Pro Tip: Because Force foam keeps product at the surface, a small amount of polish goes a long way. Add more only when the pad starts to run dry.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The White sits in the middle of the Force line, so it's the pad that turns a corrected panel into a polished one. Its dense hybrid foam keeps polish working at the surface on forced-rotation machines.
Works Best With
✅ Rupes Uno Advanced – A fine-cut polish for light correction in one step, or as the second step after compounding.
✅ Sonax Perfect Finish – A finishing polish with modest cut that refines paint to a high gloss.
✅ Lake Country Force Black Finishing Pad – The next Force pad down, for final finishing after the White.
✅ Lake Country Force White Polishing Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.
❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.
❓ Question: What sizes do you stock?
💡 Answer: We carry the Force White in 6.5 inch, which fits a 6-inch backing plate, plus the 1-inch and 2-inch micro pads.
Technical Specifications
📏 Pad Size: 6.5" diameter (5-pack, 10-pack, and 24-pack)
🔧 Backing Plate: 6" plate
🛠 Material: Force hybrid foam with buff-backed design
🚗 Application Type: Polishing
⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.