The Lake Country Force White Polishing Micro Pads bring the polishing pad from Lake Country's Force hybrid foam line to 1-inch and 2-inch backing plates, sold in 10-packs. They're made for refining paint in tight spots that full-size pads can't reach.
Video Demonstration
Key Features & Benefits
🔹 Polishing Foam – Lake Country rates this pad as Polishing, the middle of the five Force pads, between Orange Cutting and Black Finishing.
🔹 Sized for 1" and 2" Backing Plates – Lake Country's Force range is designed to fit 1-inch, 2-inch, and 3-inch backing plates, so these micro pads match the small plates on mini polishers.
🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.
🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Attach the pad, centered, to a matching 1-inch or 2-inch hook-and-loop backing plate on your mini polisher.
Step 3: Prime the pad with a small amount of polish. Small pads need very little product.
Step 4: Work slowly in small areas, keeping the pad flat and watching edges and body lines closely.
Step 5: Wipe off residue and inspect. Follow with a Force Black micro pad for maximum gloss.
Pro Tip: Lake Country notes that Force micro pads pair well with mini rotary polishers, which give precise control in awkward spots. Its Polishing Pad FAQ adds that at 2 inches and below, foam pads work in either rotary or orbital mode.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
Small areas are where a polishing job gets judged up close. The Force White micros let you refine pillars, mirrors, and trim edges with the same foam you use on the panels.
Works Best With
✅ Rupes iBrid Nano II Lightweight Cordless Polisher – A mini polisher with rotary and orbital modes and a 2-inch backing plate, built for tight areas.
✅ Rupes iBrid Nano Backing Plate, 2 Inch – A replacement 2-inch plate for the iBrid Nano, for use with 2-inch pads.
✅ Sonax Perfect Finish – A finishing polish with modest cut that refines paint to a high gloss.
✅ Lake Country Force White Polishing Pad – The full-size version of this pad, for the larger panels on the same job.
Frequently Asked Questions
❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.
❓ Question: What machines are these for?
💡 Answer: Mini polishers with 1-inch or 2-inch backing plates. Lake Country highlights Force micro pads on mini rotary polishers, and notes that at this size foam works in rotary or orbital mode.
❓ Question: Can they handle heavy defects?
💡 Answer: Lake Country notes that its Force micro range lets you tackle heavy defect removal, such as sanding marks that need rotary action, in awkward spots. Match the pad color to the defect.
Technical Specifications
📏 Size: For 1" and 2" backing plates
🛠 Material: Force hybrid foam
🚗 Application Type: Polishing in tight areas
⚙️ Machine Compatibility: Mini and micro polishers (rotary or orbital)
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Force White Polishing Micro Pads bring the polishing pad from Lake Country's Force hybrid foam line to 1-inch and 2-inch backing plates, sold in 10-packs. They're made for refining paint in tight spots that full-size pads can't reach.
Video Demonstration
Key Features & Benefits
🔹 Polishing Foam – Lake Country rates this pad as Polishing, the middle of the five Force pads, between Orange Cutting and Black Finishing.
🔹 Sized for 1" and 2" Backing Plates – Lake Country's Force range is designed to fit 1-inch, 2-inch, and 3-inch backing plates, so these micro pads match the small plates on mini polishers.
🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.
🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Attach the pad, centered, to a matching 1-inch or 2-inch hook-and-loop backing plate on your mini polisher.
Step 3: Prime the pad with a small amount of polish. Small pads need very little product.
Step 4: Work slowly in small areas, keeping the pad flat and watching edges and body lines closely.
Step 5: Wipe off residue and inspect. Follow with a Force Black micro pad for maximum gloss.
Pro Tip: Lake Country notes that Force micro pads pair well with mini rotary polishers, which give precise control in awkward spots. Its Polishing Pad FAQ adds that at 2 inches and below, foam pads work in either rotary or orbital mode.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
Small areas are where a polishing job gets judged up close. The Force White micros let you refine pillars, mirrors, and trim edges with the same foam you use on the panels.
Works Best With
✅ Rupes iBrid Nano II Lightweight Cordless Polisher – A mini polisher with rotary and orbital modes and a 2-inch backing plate, built for tight areas.
✅ Rupes iBrid Nano Backing Plate, 2 Inch – A replacement 2-inch plate for the iBrid Nano, for use with 2-inch pads.
✅ Sonax Perfect Finish – A finishing polish with modest cut that refines paint to a high gloss.
✅ Lake Country Force White Polishing Pad – The full-size version of this pad, for the larger panels on the same job.
Frequently Asked Questions
❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.
❓ Question: What machines are these for?
💡 Answer: Mini polishers with 1-inch or 2-inch backing plates. Lake Country highlights Force micro pads on mini rotary polishers, and notes that at this size foam works in rotary or orbital mode.
❓ Question: Can they handle heavy defects?
💡 Answer: Lake Country notes that its Force micro range lets you tackle heavy defect removal, such as sanding marks that need rotary action, in awkward spots. Match the pad color to the defect.
Technical Specifications
📏 Size: For 1" and 2" backing plates
🛠 Material: Force hybrid foam
🚗 Application Type: Polishing in tight areas
⚙️ Machine Compatibility: Mini and micro polishers (rotary or orbital)
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.