The Lake Country HDO Heavy Cutting Fiber Pad is a microfiber cutting pad with a blue foam interface from Lake Country's Heavy Duty Orbital (HDO) line, built specifically for long-throw orbital polishers. It's the most aggressive pad in the HDO family, for heavier defects such as sanding marks and deeper scratches.
Video Demonstration
Key Features & Benefits
🔹 Microfiber Cut for Long-Throw Machines – Lake Country built this pad around its microfiber cutting pads and adapted it for long-throw orbitals. It covers the heavy-cutting end of the HDO range.
🔹 Center Hole for Cooling – The HDO microfiber pads have a center hole that improves ventilation and cooling. Lake Country notes this matters on long-throw polishers, whose extra movement builds more heat.
🔹 Center Cooling Chamber – On the full-size HDO microfiber pads, a center cooling chamber further reduces the risk of overheating.
🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating. It also improves access in tight spots and creates a safer buffer zone around the backing plate.
🔹 Even Pressure – The design spreads pressure evenly like an exact-fit pad, with the precision and safety of a tapered pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad by working a light, even coat of cutting compound into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat.
Step 5: Wipe off residue and inspect. Microfiber cutting pads can leave a faint haze, called micromarring, so plan a polishing step with a foam pad afterward.
Step 6: Clean the fibers often while you work so the pad doesn't clog with spent compound and paint residue.
Pro Tip: Lake Country recommends cleaning microfiber pads with compressed air, using a blow gun or tornado-style tool. Always wear a dust mask or respirator and eye protection when you do.
Pad Care
When you finish, blow the pad out with compressed air or brush out the fibers. Then wash it in a pad washer, or in a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink the hook-and-loop backing. Always let pads air dry.
Why We Love It
Long-throw polishers move a lot of pad, and that builds heat fast in a cutting pad. The HDO Heavy Cutting Fiber pairs Lake Country's microfiber cut with a center hole, cooling chamber, and tapered edge built for that motion. It's the pad to grab when foam won't remove enough and you want to stay on your long-throw machine.
Works Best With
✅ Rupes D-A Coarse High Performance Cut Compound – A cutting compound formulated for dual action polishers and coarse microfiber discs.
✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound for DA and rotary machines that CarPro recommends with Lake Country microfiber cutting pads.
✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A 15mm long-throw orbital polisher. Pair it with the 5.5-inch pad.
✅ Lake Country HDO Orange Foam Pad – An HDO foam polishing pad for the step after cutting, to remove the light haze microfiber can leave.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer for cleaning microfiber pads.
Frequently Asked Questions
❓ Question: What is it designed for?
💡 Answer: Heavier correction on long-throw orbital polishers. Lake Country says its microfiber cutting pads are aggressive enough for sanding marks on all but the toughest paints.
❓ Question: How is it different from the standard Lake Country Microfiber Cutting Pad?
💡 Answer: The HDO version adds a center hole, a center cooling chamber on full-size pads, and a tapered edge. All three are aimed at the extra heat and movement of long-throw polishers.
❓ Question: Can I use it on a regular DA?
💡 Answer: Yes. Lake Country lists random orbital DA and mini polishers as recommended tools, though the HDO line is designed specifically for long-throw orbitals.
❓ Question: Will it finish down completely?
💡 Answer: Microfiber cutting pads can leave a faint haze, called micromarring. Follow with an HDO foam pad and a finer polish for full gloss.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"
🛠 Material: Microfiber on a blue foam interface, with center hole and tapered edge
🚗 Application Type: Heavy cutting
⚙️ Machine Compatibility: Long-throw orbital, random orbital DA, and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country HDO Heavy Cutting Fiber Pad is a microfiber cutting pad with a blue foam interface from Lake Country's Heavy Duty Orbital (HDO) line, built specifically for long-throw orbital polishers. It's the most aggressive pad in the HDO family, for heavier defects such as sanding marks and deeper scratches.
Video Demonstration
Key Features & Benefits
🔹 Microfiber Cut for Long-Throw Machines – Lake Country built this pad around its microfiber cutting pads and adapted it for long-throw orbitals. It covers the heavy-cutting end of the HDO range.
🔹 Center Hole for Cooling – The HDO microfiber pads have a center hole that improves ventilation and cooling. Lake Country notes this matters on long-throw polishers, whose extra movement builds more heat.
🔹 Center Cooling Chamber – On the full-size HDO microfiber pads, a center cooling chamber further reduces the risk of overheating.
🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating. It also improves access in tight spots and creates a safer buffer zone around the backing plate.
🔹 Even Pressure – The design spreads pressure evenly like an exact-fit pad, with the precision and safety of a tapered pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad by working a light, even coat of cutting compound into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat.
Step 5: Wipe off residue and inspect. Microfiber cutting pads can leave a faint haze, called micromarring, so plan a polishing step with a foam pad afterward.
Step 6: Clean the fibers often while you work so the pad doesn't clog with spent compound and paint residue.
Pro Tip: Lake Country recommends cleaning microfiber pads with compressed air, using a blow gun or tornado-style tool. Always wear a dust mask or respirator and eye protection when you do.
Pad Care
When you finish, blow the pad out with compressed air or brush out the fibers. Then wash it in a pad washer, or in a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink the hook-and-loop backing. Always let pads air dry.
Why We Love It
Long-throw polishers move a lot of pad, and that builds heat fast in a cutting pad. The HDO Heavy Cutting Fiber pairs Lake Country's microfiber cut with a center hole, cooling chamber, and tapered edge built for that motion. It's the pad to grab when foam won't remove enough and you want to stay on your long-throw machine.
Works Best With
✅ Rupes D-A Coarse High Performance Cut Compound – A cutting compound formulated for dual action polishers and coarse microfiber discs.
✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound for DA and rotary machines that CarPro recommends with Lake Country microfiber cutting pads.
✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A 15mm long-throw orbital polisher. Pair it with the 5.5-inch pad.
✅ Lake Country HDO Orange Foam Pad – An HDO foam polishing pad for the step after cutting, to remove the light haze microfiber can leave.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer for cleaning microfiber pads.
Frequently Asked Questions
❓ Question: What is it designed for?
💡 Answer: Heavier correction on long-throw orbital polishers. Lake Country says its microfiber cutting pads are aggressive enough for sanding marks on all but the toughest paints.
❓ Question: How is it different from the standard Lake Country Microfiber Cutting Pad?
💡 Answer: The HDO version adds a center hole, a center cooling chamber on full-size pads, and a tapered edge. All three are aimed at the extra heat and movement of long-throw polishers.
❓ Question: Can I use it on a regular DA?
💡 Answer: Yes. Lake Country lists random orbital DA and mini polishers as recommended tools, though the HDO line is designed specifically for long-throw orbitals.
❓ Question: Will it finish down completely?
💡 Answer: Microfiber cutting pads can leave a faint haze, called micromarring. Follow with an HDO foam pad and a finer polish for full gloss.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"
🛠 Material: Microfiber on a blue foam interface, with center hole and tapered edge
🚗 Application Type: Heavy cutting
⚙️ Machine Compatibility: Long-throw orbital, random orbital DA, and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.