Your cart1

Complete Your Kit

The Lake Country SDO Orange Polishing Foam Pad is the middle pad in Lake Country's Standard Duty Orbital (SDO) line, made for random orbital DA polishers. Use it for swirl removal and general polishing, often as the first pad you try on a job.

Video Demonstration

Key Features & Benefits

🔹 Polishing Foam – Lake Country rates orange as Polishing, between the SDO Blue Heavy Polishing and Black Finishing pads.

🔹 Swirl Removal – Lake Country recommends its orange SDO foam as a light cutting pad for swirl marks, often gently enough to finish to a high gloss with one pad.

🔹 Same Foams as HDO – Lake Country builds SDO pads with the same engineered foams as its HDO line, without the HDO dual-layer construction.

🔹 Center Ventilated Cooling Chamber – The center hole works as a tunnel to release heat from the foam, lowering surface temperatures and increasing pad durability.

🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating, which helps on curved and contoured panels.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Lake Country designs SDO pads for random orbital DA polishers with a center-ventilated backing plate. Center the pad on the plate.

Step 3: Prime the pad with a light, even coat of polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat so it keeps rotating.

Step 5: Wipe off residue with a clean microfiber towel and inspect. If you want more gloss, finish with the SDO Black pad.

Pro Tip: Lake Country recommends testing with a mid-level pad first, and the SDO Orange is that pad. If it doesn't remove enough, step up to the SDO Blue. If it leaves light haze, finish with the SDO Black.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Most correction jobs start with an orange pad, and the SDO Orange is built to be that pad on a standard DA. It uses the same foam as Lake Country's HDO line, with a center-vented chamber and tapered edge that keep it cool and rotating.

Works Best With

✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.

✅ Koch Chemie One Cut & Finish P6.02 – A one-step cutting compound and finishing polish for DA polishers.

✅ Lake Country SDO Blue Heavy Polishing Pad – The heavy polishing pad in the same SDO line, for defects the Orange can't remove.

✅ Lake Country SDO Black Finishing Pad – The SDO finishing pad, for the final step.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How does the Orange compare to the other SDO pads?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing.

❓ Question: How is SDO different from HDO?
💡 Answer: Both use the same foams. HDO pads add a dual-layer construction with a thinner dense layer under the working foam, designed for the demands of long-throw polishers. SDO pads are Lake Country's standard orbital option for DA polishers.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA, forced (gear-driven) DA, and mini polishers.

❓ Question: What backing plate do I need?
💡 Answer: A center-ventilated plate, sized 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch. The pad should always be at least as large as the plate.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: Center-ventilated; 3.5" pad fits a 3" plate, 5.5" fits 5", 6.5" fits 6"

🛠 Material: Engineered foam with center ventilated cooling chamber and tapered edge

🚗 Application Type: Polishing and swirl removal

⚙️ Machine Compatibility: Random orbital DA, forced DA, and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Sale

Lake Country SDO Orange Polishing Foam Pad 3.5, 5.5, 6.5 -Inch — Medium Cut Paint Correction

SKU: SDO-22350-LC
Regular price $6.25
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country SDO Orange Polishing Foam Pad is the middle pad in Lake Country's Standard Duty Orbital (SDO) line, made for random orbital DA polishers. Use it for swirl removal and general polishing, often as the first pad you try on a job.

Video Demonstration

Key Features & Benefits

🔹 Polishing Foam – Lake Country rates orange as Polishing, between the SDO Blue Heavy Polishing and Black Finishing pads.

🔹 Swirl Removal – Lake Country recommends its orange SDO foam as a light cutting pad for swirl marks, often gently enough to finish to a high gloss with one pad.

🔹 Same Foams as HDO – Lake Country builds SDO pads with the same engineered foams as its HDO line, without the HDO dual-layer construction.

🔹 Center Ventilated Cooling Chamber – The center hole works as a tunnel to release heat from the foam, lowering surface temperatures and increasing pad durability.

🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating, which helps on curved and contoured panels.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Lake Country designs SDO pads for random orbital DA polishers with a center-ventilated backing plate. Center the pad on the plate.

Step 3: Prime the pad with a light, even coat of polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat so it keeps rotating.

Step 5: Wipe off residue with a clean microfiber towel and inspect. If you want more gloss, finish with the SDO Black pad.

Pro Tip: Lake Country recommends testing with a mid-level pad first, and the SDO Orange is that pad. If it doesn't remove enough, step up to the SDO Blue. If it leaves light haze, finish with the SDO Black.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Most correction jobs start with an orange pad, and the SDO Orange is built to be that pad on a standard DA. It uses the same foam as Lake Country's HDO line, with a center-vented chamber and tapered edge that keep it cool and rotating.

Works Best With

✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.

✅ Koch Chemie One Cut & Finish P6.02 – A one-step cutting compound and finishing polish for DA polishers.

✅ Lake Country SDO Blue Heavy Polishing Pad – The heavy polishing pad in the same SDO line, for defects the Orange can't remove.

✅ Lake Country SDO Black Finishing Pad – The SDO finishing pad, for the final step.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How does the Orange compare to the other SDO pads?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing.

❓ Question: How is SDO different from HDO?
💡 Answer: Both use the same foams. HDO pads add a dual-layer construction with a thinner dense layer under the working foam, designed for the demands of long-throw polishers. SDO pads are Lake Country's standard orbital option for DA polishers.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA, forced (gear-driven) DA, and mini polishers.

❓ Question: What backing plate do I need?
💡 Answer: A center-ventilated plate, sized 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch. The pad should always be at least as large as the plate.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: Center-ventilated; 3.5" pad fits a 3" plate, 5.5" fits 5", 6.5" fits 6"

🛠 Material: Engineered foam with center ventilated cooling chamber and tapered edge

🚗 Application Type: Polishing and swirl removal

⚙️ Machine Compatibility: Random orbital DA, forced DA, and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.