Your cart1

BENDPAK HD-9S Series 9000lb Capacity Super Wide Four Post Lift

HD-9SW Extra Wide Four Post Lift

$12,495.00 USD
Unit price
per 
Complete Your Kit

The Lake Country CCS Orange Light Cutting Foam Pad is the light cutting pad in Lake Country's original CCS line, made for DA and random orbital polishers. Use it for swirl removal and lighter correction, with CCS pockets that hold polish and release it as you work.

Video Demonstration

Key Features & Benefits

🔹 Light Cutting Foam – Lake Country rates this pad as Light Cutting, between the CCS Yellow Cutting and White Heavy Polishing pads.

🔹 CCS Technology – Conventional foam pads gradually absorb compound and polish, trapping it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells so pockets release polish gradually as you work.

🔹 Runs Flat, Runs Cooler – CCS pockets reduce surface tension so the pad runs flat on the paint, and reduce surface contact for less friction heat.

🔹 Thin, Tapered, Exact-Fit Design – Lake Country builds these pads with a thin, tapered profile and an exact-fit backing for classic, optimized performance.

🔹 Made for DA Polishers – Lake Country makes its CCS pads exclusively for DA and random orbital machines.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of compound or polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat on the paint.

Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with the CCS White or Black pad to refine the finish.

Pro Tip: Because CCS pockets release product gradually, start with less compound or polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Light cutting is where most correction jobs land, and the CCS Orange is built for it on a DA. Its CCS pockets keep product at the surface, so each application works longer.

Works Best With

✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.

✅ Koch Chemie One Cut & Finish P6.02 – A one-step cutting compound and finishing polish for DA polishers.

✅ Lake Country CCS Yellow Cutting Pad – The cutting pad in the same CCS line, for defects the Orange can't remove.

✅ Lake Country CCS White Polishing Pad – The heavy polishing pad in the same CCS line, for the next step.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the CCS colors compare?
💡 Answer: Lake Country lists four colors in this line: Yellow Cutting, Orange Light Cutting, White Heavy Polishing, and Black Finishing.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country makes CCS pads exclusively for DA and random orbital polishers.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: CCS foam, thin and tapered with exact-fit backing

🚗 Application Type: Light cutting

⚙️ Machine Compatibility: DA and random orbital polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Sale

Lake Country CCS Orange Light Cutting Foam Pad 3.5, 5.5, 6.5 -Inch — Paint Correction

SKU: 78-22350CCS-76M-LC
Regular price $6.99
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country CCS Orange Light Cutting Foam Pad is the light cutting pad in Lake Country's original CCS line, made for DA and random orbital polishers. Use it for swirl removal and lighter correction, with CCS pockets that hold polish and release it as you work.

Video Demonstration

Key Features & Benefits

🔹 Light Cutting Foam – Lake Country rates this pad as Light Cutting, between the CCS Yellow Cutting and White Heavy Polishing pads.

🔹 CCS Technology – Conventional foam pads gradually absorb compound and polish, trapping it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells so pockets release polish gradually as you work.

🔹 Runs Flat, Runs Cooler – CCS pockets reduce surface tension so the pad runs flat on the paint, and reduce surface contact for less friction heat.

🔹 Thin, Tapered, Exact-Fit Design – Lake Country builds these pads with a thin, tapered profile and an exact-fit backing for classic, optimized performance.

🔹 Made for DA Polishers – Lake Country makes its CCS pads exclusively for DA and random orbital machines.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of compound or polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat on the paint.

Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with the CCS White or Black pad to refine the finish.

Pro Tip: Because CCS pockets release product gradually, start with less compound or polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Light cutting is where most correction jobs land, and the CCS Orange is built for it on a DA. Its CCS pockets keep product at the surface, so each application works longer.

Works Best With

✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.

✅ Koch Chemie One Cut & Finish P6.02 – A one-step cutting compound and finishing polish for DA polishers.

✅ Lake Country CCS Yellow Cutting Pad – The cutting pad in the same CCS line, for defects the Orange can't remove.

✅ Lake Country CCS White Polishing Pad – The heavy polishing pad in the same CCS line, for the next step.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the CCS colors compare?
💡 Answer: Lake Country lists four colors in this line: Yellow Cutting, Orange Light Cutting, White Heavy Polishing, and Black Finishing.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country makes CCS pads exclusively for DA and random orbital polishers.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: CCS foam, thin and tapered with exact-fit backing

🚗 Application Type: Light cutting

⚙️ Machine Compatibility: DA and random orbital polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
D
Dylan P.

Great polishing pads.