The Lake Country Purple Foamed Wool Pad combines knitted lambswool with Lake Country's patented foaming process. The result is a heavy cutting pad for removing sanding marks and severe defects that finishes much more like foam than traditional wool.
Video Demonstration
Key Features & Benefits
🔹 Patented Foamed Wool – Lake Country's patented nanofoam process coats the base of the lambswool fibers with microscopic foam particles. The pad cuts like natural sheepskin but finishes like a foam pad.
🔹 Removes P1500 Sanding Marks – Lake Country rates it to aggressively remove P1500-grit sanding scratches while leaving a lustrous finish with minimal haze or compounding swirls.
🔹 Closer to a One-Step Pad – Lake Country notes that the Purple Foamed Wool's cut and finish are closely matched, which puts it nearer to a one-step pad than most cutting wool.
🔹 Resists Caking and Matting – The foamed fibers resist caking and matting, so the pad keeps cutting consistently.
🔹 Better Cushion and Product Retention – Foaming creates tiny air pockets at the base of the fibers, which improves cushioning and helps the pad hold compound and polish.
🔹 Consistent Pad to Pad – Lake Country's process produces a uniform material, so performance stays consistent from one pad to the next.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines. Wool cuts quickly, so take extra care on edges and thin paint.
Step 2: Use a rotary or forced (gear-driven) DA polisher. Attach the pad, centered, to a hook-and-loop backing plate no larger than the pad.
Step 3: Prime the pad by working a light, even amount of cutting compound into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, and watch panel temperature.
Step 5: Clean the pad often while you work. Lake Country recommends a standard pad brush for knitted wool pads.
Step 6: Wipe away residue and inspect. If you want more refinement, follow with a foam polishing pad and a finishing polish.
Pro Tip: These are the 3/4" pile version, which Lake Country designs as an alternative to traditional wool on rotary or forced DA polishers. On a standard random orbital DA, a pad made for that motion, such as the Lake Country Microfiber Cutting Pad, is the better choice.
Pad Care
Brush out dried residue after use. Lake Country recommends washing wool pads in a pad washer, or in a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink wool. Lake Country notes that washing with water can slightly alter knitted wool pads. Always let wool pads air dry.
Why We Love It
Traditional wool is fast, but it can leave haze and compounding swirls that take extra steps to clean up. The Purple Foamed Wool narrows that gap. It removes sanding marks and heavy defects quickly, and its foamed fibers finish closer to a foam pad, so the follow-up polishing step goes faster. It's one of Lake Country's most popular designs, and the foundation for the newer Blue Hybrid Wool.
Works Best With
✅ Koch Chemie Heavy Cut H9.02 – An extreme-cut compound that Koch Chemie recommends with wool pads for the most aggressive correction, on rotary or DA polishers.
✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound originally designed for rotary use, a match for this pad's heavy-correction role.
✅ Lake Country Rotary Backing Plate 3 Inch – Lake Country's 2-7/8" rotary plate, made for 3" to 3.5" foam or wool pads. A match for the 3-inch pad on a rotary.
✅ Lake Country HDO Orange Foam Pad – A foam polishing pad to follow the wool step when you want to refine the finish further.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer for cleaning pads after the job.
Frequently Asked Questions
❓ Question: What is this pad designed for?
💡 Answer: Heavy correction: removing P1500-grit sanding marks and severe defects while leaving a finish with minimal haze or compounding swirls.
❓ Question: Which machines can I use it on?
💡 Answer: The pads we stock have a 3/4" pile. Lake Country designs the 3/4" and 1" pile versions as an alternative to traditional wool on rotary or forced (gear-driven) DA polishers. Lake Country also makes a 1/4" pile version for standard random orbital polishers, but that isn't the version we carry.
❓ Question: How is it different from regular wool pads?
💡 Answer: Lake Country's patented process coats the base of the lambswool fibers with microscopic foam particles. The pad still cuts like wool, but it finishes closer to foam and resists caking and matting.
❓ Question: How does it compare to the Lake Country Blue Hybrid Wool pad?
💡 Answer: The Blue Hybrid Wool builds on the Purple Foamed Wool concept with higher foam content, which adds cushioning and firmness and gives an even better finish. Lake Country positions it for rotary or forced DA use.
❓ Question: Can I wash it?
💡 Answer: Yes. Brush out residue, then use a pad washer or a gentle machine cycle in cold or warm water, and air dry. Avoid hot water, which can shrink wool.
Technical Specifications
📏 Pad Size: 3", 5.25", and 6.5" diameter (sold in singles and multi-packs)
📐 Pile Height: 3/4"
🛠 Material: Knitted lambswool with Lake Country's patented foamed fibers
🚗 Application Type: Heavy cutting with improved finishing
⚙️ Machine Compatibility: Rotary and forced (gear-driven) DA polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Purple Foamed Wool Pad combines knitted lambswool with Lake Country's patented foaming process. The result is a heavy cutting pad for removing sanding marks and severe defects that finishes much more like foam than traditional wool.
Video Demonstration
Key Features & Benefits
🔹 Patented Foamed Wool – Lake Country's patented nanofoam process coats the base of the lambswool fibers with microscopic foam particles. The pad cuts like natural sheepskin but finishes like a foam pad.
🔹 Removes P1500 Sanding Marks – Lake Country rates it to aggressively remove P1500-grit sanding scratches while leaving a lustrous finish with minimal haze or compounding swirls.
🔹 Closer to a One-Step Pad – Lake Country notes that the Purple Foamed Wool's cut and finish are closely matched, which puts it nearer to a one-step pad than most cutting wool.
🔹 Resists Caking and Matting – The foamed fibers resist caking and matting, so the pad keeps cutting consistently.
🔹 Better Cushion and Product Retention – Foaming creates tiny air pockets at the base of the fibers, which improves cushioning and helps the pad hold compound and polish.
🔹 Consistent Pad to Pad – Lake Country's process produces a uniform material, so performance stays consistent from one pad to the next.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines. Wool cuts quickly, so take extra care on edges and thin paint.
Step 2: Use a rotary or forced (gear-driven) DA polisher. Attach the pad, centered, to a hook-and-loop backing plate no larger than the pad.
Step 3: Prime the pad by working a light, even amount of cutting compound into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, and watch panel temperature.
Step 5: Clean the pad often while you work. Lake Country recommends a standard pad brush for knitted wool pads.
Step 6: Wipe away residue and inspect. If you want more refinement, follow with a foam polishing pad and a finishing polish.
Pro Tip: These are the 3/4" pile version, which Lake Country designs as an alternative to traditional wool on rotary or forced DA polishers. On a standard random orbital DA, a pad made for that motion, such as the Lake Country Microfiber Cutting Pad, is the better choice.
Pad Care
Brush out dried residue after use. Lake Country recommends washing wool pads in a pad washer, or in a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink wool. Lake Country notes that washing with water can slightly alter knitted wool pads. Always let wool pads air dry.
Why We Love It
Traditional wool is fast, but it can leave haze and compounding swirls that take extra steps to clean up. The Purple Foamed Wool narrows that gap. It removes sanding marks and heavy defects quickly, and its foamed fibers finish closer to a foam pad, so the follow-up polishing step goes faster. It's one of Lake Country's most popular designs, and the foundation for the newer Blue Hybrid Wool.
Works Best With
✅ Koch Chemie Heavy Cut H9.02 – An extreme-cut compound that Koch Chemie recommends with wool pads for the most aggressive correction, on rotary or DA polishers.
✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound originally designed for rotary use, a match for this pad's heavy-correction role.
✅ Lake Country Rotary Backing Plate 3 Inch – Lake Country's 2-7/8" rotary plate, made for 3" to 3.5" foam or wool pads. A match for the 3-inch pad on a rotary.
✅ Lake Country HDO Orange Foam Pad – A foam polishing pad to follow the wool step when you want to refine the finish further.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer for cleaning pads after the job.
Frequently Asked Questions
❓ Question: What is this pad designed for?
💡 Answer: Heavy correction: removing P1500-grit sanding marks and severe defects while leaving a finish with minimal haze or compounding swirls.
❓ Question: Which machines can I use it on?
💡 Answer: The pads we stock have a 3/4" pile. Lake Country designs the 3/4" and 1" pile versions as an alternative to traditional wool on rotary or forced (gear-driven) DA polishers. Lake Country also makes a 1/4" pile version for standard random orbital polishers, but that isn't the version we carry.
❓ Question: How is it different from regular wool pads?
💡 Answer: Lake Country's patented process coats the base of the lambswool fibers with microscopic foam particles. The pad still cuts like wool, but it finishes closer to foam and resists caking and matting.
❓ Question: How does it compare to the Lake Country Blue Hybrid Wool pad?
💡 Answer: The Blue Hybrid Wool builds on the Purple Foamed Wool concept with higher foam content, which adds cushioning and firmness and gives an even better finish. Lake Country positions it for rotary or forced DA use.
❓ Question: Can I wash it?
💡 Answer: Yes. Brush out residue, then use a pad washer or a gentle machine cycle in cold or warm water, and air dry. Avoid hot water, which can shrink wool.
Technical Specifications
📏 Pad Size: 3", 5.25", and 6.5" diameter (sold in singles and multi-packs)
📐 Pile Height: 3/4"
🛠 Material: Knitted lambswool with Lake Country's patented foamed fibers
🚗 Application Type: Heavy cutting with improved finishing
⚙️ Machine Compatibility: Rotary and forced (gear-driven) DA polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.