The Lake Country Microfiber Cutting Pad Multi-Packs bring Lake Country's white microfiber cutting pad to mini polishers, in 1.5-inch 6-packs and 2.25-inch 4-packs. They're made for heavier defect removal in tight spots that full-size pads can't reach.

Video Demonstration

Key Features & Benefits

🔹 White Microfiber Cutting Pad – Lake Country's white cutting pad uses a microfiber blend on a blue foam interface for heavier correction.

🔹 Made for Mini Polishers – Lake Country says its 1.5-inch and 2.25-inch microfiber pads are perfect for use with a mini long-throw polisher or micro polisher.

🔹 Precision Sizing – Each pad is sized to minimize overhang for precise polishing and even pressure.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Attach the pad, centered, to a matching small hook-and-loop backing plate on your mini polisher (a 2-inch plate for the 2.25-inch pads).

Step 3: Prime the pad with a small amount of cutting compound. Small pads need very little product.

Step 4: Work slowly in small areas, keeping the pad flat and watching edges and body lines closely.

Step 5: Wipe off residue and inspect. Microfiber cutting pads can leave a faint haze, so follow with a finer pad if needed.

Pro Tip: Lake Country recommends cleaning microfiber pads with compressed air, using a blow gun or tornado-style tool. Always wear a dust mask or respirator and eye protection when you do.

Pad Care

When you finish, blow the pad out with compressed air or brush out the fibers. Then wash it in a pad washer, or in a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink the hook-and-loop backing. Always let pads air dry.

Why We Love It

Sanding marks and deeper scratches don't stop at the edge of a panel. These small cutting pads bring Lake Country's microfiber cut to pillars, mirrors, and tight body lines.

Works Best With

✅ Rupes iBrid Nano II Lightweight Cordless Polisher – A mini polisher with rotary and orbital modes, built for tight areas.

✅ Rupes iBrid Nano Backing Plate, 2 Inch – A 2-inch plate for the iBrid Nano. Pair it with the 2.25-inch pads.

✅ Rupes D-A Coarse High Performance Cut Compound – A cutting compound formulated for DA polishers and coarse microfiber discs.

✅ Lake Country Microfiber Cutting Pad – The full-size version of this pad, for the larger panels on the same job.

Frequently Asked Questions

❓ Question: What machines are these for?
💡 Answer: Lake Country says its 1.5-inch and 2.25-inch microfiber pads are made for mini long-throw polishers and micro polishers.

❓ Question: Can I use them in rotary mode?
💡 Answer: Lake Country notes that at 2 inches and below, microfiber pads work in either rotary or orbital mode.

❓ Question: Will they finish down completely?
💡 Answer: Microfiber cutting pads can leave a faint haze, called micromarring. Follow with a finer pad and polish for full gloss.

Technical Specifications

📏 Pad Size: 1.5" (6-pack) and 2.25" (4-pack)

🛠 Material: White microfiber on a blue foam interface

🚗 Application Type: Cutting in tight areas

⚙️ Machine Compatibility: Mini long-throw and micro polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.