The Lake Country Low Lint Wool Cutting Pad is a knitted, prewashed lambswool pad on a foam interface, made for heavy cutting on rotary, forced DA, and random orbital DA polishers. It's designed to cut hard while shedding less lint than a traditional wool pad.
Video Demonstration
Key Features & Benefits
🔹 Prewashed Knitted Lambswool – Lake Country mats knitted, prewashed lambswool to a foam interface for comfort, performance, and a better overall feel.
🔹 1/2" Pile, Low Lint – The 1/2-inch pile delivers strong cut with a refined finish, with reduced linting compared with a traditional wool pad.
🔹 Padded Foam Interface – The padded interface makes the pad easier to use and more durable. Lake Country says it feels great on a rotary and holds up even on a 21mm DA.
🔹 Exact-Fit Pressure, Tapered Safety – The design spreads pressure evenly like an exact-fit pad, with the safety of a tapered pad.
🔹 Works on Gelcoat – Lake Country notes it works well on gelcoat for removing oxidation, and its finish lets it work as a one-step pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Attach the pad, centered, to a hook-and-loop backing plate no larger than the pad.
Step 3: Prime the pad by working a light, even amount of cutting compound into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, and watch panel temperature.
Step 5: Brush out the pad often, then wipe off residue and inspect. Follow with a foam polishing pad if you want more refinement.
Pro Tip: Lake Country notes that on a DA, this pad is ideally used for heavy compounding, where it brings more cut than a microfiber pad.
Pad Care
Brush out the pad often while you work. Lake Country recommends a standard pad brush for knitted wool pads. To wash, use a pad washer or a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink wool, and Lake Country notes that washing with water can slightly alter knitted wool pads. Always let wool pads air dry.
Why We Love It
Wool cuts fast, but lint and haze can slow you down. The Low Lint pad keeps the cut and reduces both, and its foam interface makes it comfortable on anything from a rotary to a 21mm long-throw DA. Lake Country also pairs it with its SDO foam system.
Works Best With
✅ Koch Chemie Heavy Cut H9.02 – An extreme-cut compound Koch Chemie recommends with wool pads for the most aggressive correction.
✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound for rotary and DA machines.
✅ Lake Country SDO Orange Polishing Pad – An SDO foam pad. Lake Country says the SDO system pairs with its Low Lint wool pads.
✅ Rupes BigFoot LHR21 Mark V Random Orbital Polisher – A 21mm long-throw DA. Lake Country says this pad holds up even on 21mm machines.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists forced DA, random orbital DA, and rotary polishers.
❓ Question: What is the pile height?
💡 Answer: 1/2 inch.
❓ Question: Can I use it as a one-step pad?
💡 Answer: Lake Country notes its finish lets it work as a one-step pad, and that on a DA it is ideally used for heavy compounding.
❓ Question: Can I use it on boats?
💡 Answer: Lake Country says it works well on gelcoat to remove oxidation.
Technical Specifications
📏 Pad Size: Three sizes, listed as 3, 5, and 6 inch (sold in singles and multi-packs)
🛠 Material: Prewashed knitted lambswool, 1/2" pile, on a padded foam interface
🚗 Application Type: Heavy cutting
⚙️ Machine Compatibility: Rotary, forced DA, and random orbital DA
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Low Lint Wool Cutting Pad is a knitted, prewashed lambswool pad on a foam interface, made for heavy cutting on rotary, forced DA, and random orbital DA polishers. It's designed to cut hard while shedding less lint than a traditional wool pad.
Video Demonstration
Key Features & Benefits
🔹 Prewashed Knitted Lambswool – Lake Country mats knitted, prewashed lambswool to a foam interface for comfort, performance, and a better overall feel.
🔹 1/2" Pile, Low Lint – The 1/2-inch pile delivers strong cut with a refined finish, with reduced linting compared with a traditional wool pad.
🔹 Padded Foam Interface – The padded interface makes the pad easier to use and more durable. Lake Country says it feels great on a rotary and holds up even on a 21mm DA.
🔹 Exact-Fit Pressure, Tapered Safety – The design spreads pressure evenly like an exact-fit pad, with the safety of a tapered pad.
🔹 Works on Gelcoat – Lake Country notes it works well on gelcoat for removing oxidation, and its finish lets it work as a one-step pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Attach the pad, centered, to a hook-and-loop backing plate no larger than the pad.
Step 3: Prime the pad by working a light, even amount of cutting compound into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, and watch panel temperature.
Step 5: Brush out the pad often, then wipe off residue and inspect. Follow with a foam polishing pad if you want more refinement.
Pro Tip: Lake Country notes that on a DA, this pad is ideally used for heavy compounding, where it brings more cut than a microfiber pad.
Pad Care
Brush out the pad often while you work. Lake Country recommends a standard pad brush for knitted wool pads. To wash, use a pad washer or a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink wool, and Lake Country notes that washing with water can slightly alter knitted wool pads. Always let wool pads air dry.
Why We Love It
Wool cuts fast, but lint and haze can slow you down. The Low Lint pad keeps the cut and reduces both, and its foam interface makes it comfortable on anything from a rotary to a 21mm long-throw DA. Lake Country also pairs it with its SDO foam system.
Works Best With
✅ Koch Chemie Heavy Cut H9.02 – An extreme-cut compound Koch Chemie recommends with wool pads for the most aggressive correction.
✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound for rotary and DA machines.
✅ Lake Country SDO Orange Polishing Pad – An SDO foam pad. Lake Country says the SDO system pairs with its Low Lint wool pads.
✅ Rupes BigFoot LHR21 Mark V Random Orbital Polisher – A 21mm long-throw DA. Lake Country says this pad holds up even on 21mm machines.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists forced DA, random orbital DA, and rotary polishers.
❓ Question: What is the pile height?
💡 Answer: 1/2 inch.
❓ Question: Can I use it as a one-step pad?
💡 Answer: Lake Country notes its finish lets it work as a one-step pad, and that on a DA it is ideally used for heavy compounding.
❓ Question: Can I use it on boats?
💡 Answer: Lake Country says it works well on gelcoat to remove oxidation.
Technical Specifications
📏 Pad Size: Three sizes, listed as 3, 5, and 6 inch (sold in singles and multi-packs)
🛠 Material: Prewashed knitted lambswool, 1/2" pile, on a padded foam interface
🚗 Application Type: Heavy cutting
⚙️ Machine Compatibility: Rotary, forced DA, and random orbital DA
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.