The Lake Country CCS Black Finishing Foam Pad is the finishing pad in Lake Country's original CCS line, made for DA and random orbital polishers. Use it as the final polishing step for maximum gloss.

Video Demonstration

Key Features & Benefits

🔹 Finishing Foam – Lake Country rates this pad as Finishing, the least aggressive of the four CCS colors.

🔹 CCS Technology – Conventional foam pads gradually absorb compound and polish, trapping it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells so pockets release polish gradually as you work.

🔹 Runs Flat, Runs Cooler – CCS pockets reduce surface tension so the pad runs flat on the paint, and reduce surface contact for less friction heat.

🔹 Thin, Tapered, Exact-Fit Design – Lake Country builds these pads with a thin, tapered profile and an exact-fit backing for classic, optimized performance.

🔹 Made for DA Polishers – Lake Country makes its CCS pads exclusively for DA and random orbital machines.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of finishing polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat on the paint.

Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.

Pro Tip: Because CCS pockets release product gradually, start with less compound or polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

The finishing step is where a correction job looks finished. The CCS Black keeps finishing polish working at the surface so it breaks down cleanly, on a thin, tapered pad that's easy to control on a DA.

Works Best With

✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.

✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.

✅ Lake Country CCS White Polishing Pad – The heavy polishing pad in the same CCS line, for the step before finishing.

✅ Lake Country Black Flat Foam Finishing Pad – The smooth-surface (non-CCS) version of this pad, which Lake Country also offers.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the CCS colors compare?
💡 Answer: Lake Country lists four colors in this line: Yellow Cutting, Orange Light Cutting, White Heavy Polishing, and Black Finishing.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country makes CCS pads exclusively for DA and random orbital polishers.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: CCS foam, thin and tapered with exact-fit backing

🚗 Application Type: Finishing

⚙️ Machine Compatibility: DA and random orbital polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Sale

Lake Country CCS Black Final Polishing Foam Pad 3.5, 5.5, 6.5 -Inch — Ultra Fine Finishing

SKU: 78-72350CCS-76M-LC
Regular price $6.99
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country CCS Black Finishing Foam Pad is the finishing pad in Lake Country's original CCS line, made for DA and random orbital polishers. Use it as the final polishing step for maximum gloss.

Video Demonstration

Key Features & Benefits

🔹 Finishing Foam – Lake Country rates this pad as Finishing, the least aggressive of the four CCS colors.

🔹 CCS Technology – Conventional foam pads gradually absorb compound and polish, trapping it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells so pockets release polish gradually as you work.

🔹 Runs Flat, Runs Cooler – CCS pockets reduce surface tension so the pad runs flat on the paint, and reduce surface contact for less friction heat.

🔹 Thin, Tapered, Exact-Fit Design – Lake Country builds these pads with a thin, tapered profile and an exact-fit backing for classic, optimized performance.

🔹 Made for DA Polishers – Lake Country makes its CCS pads exclusively for DA and random orbital machines.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of finishing polish across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat on the paint.

Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.

Pro Tip: Because CCS pockets release product gradually, start with less compound or polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

The finishing step is where a correction job looks finished. The CCS Black keeps finishing polish working at the surface so it breaks down cleanly, on a thin, tapered pad that's easy to control on a DA.

Works Best With

✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.

✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.

✅ Lake Country CCS White Polishing Pad – The heavy polishing pad in the same CCS line, for the step before finishing.

✅ Lake Country Black Flat Foam Finishing Pad – The smooth-surface (non-CCS) version of this pad, which Lake Country also offers.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the CCS colors compare?
💡 Answer: Lake Country lists four colors in this line: Yellow Cutting, Orange Light Cutting, White Heavy Polishing, and Black Finishing.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country makes CCS pads exclusively for DA and random orbital polishers.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: CCS foam, thin and tapered with exact-fit backing

🚗 Application Type: Finishing

⚙️ Machine Compatibility: DA and random orbital polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

  • 5 stars: 2 (67%)
  • 4 stars: 1 (33%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
J
Jonathan M.

Great Polishing pads. The best in my experience.

R
RYAN D.

I'd purchase again

E
ETX L.

Works great. A bit soft, so it takes a bit more work to get the final results I want but the pads stand up very well.