The Lake Country Black Flat Foam Finishing Pad is a smooth surface finishing pad made for DA, gear-driven, and mini polishers. Use it as the final polishing step for maximum gloss.
Key Features & Benefits
🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive color in its smooth surface line.
🔹 Smooth Surface Foam – Lake Country builds its flat foam pads from unique urethane foam formulations, with a smooth working face.
🔹 Thin, Tapered, Exact-Fit Design – Lake Country designs its smooth surface pads with a thin, tapered profile and an exact-fit backing to optimize performance.
🔹 Works on DA, Gear-Driven, and Mini Polishers – Lake Country lists random orbital DA, forced (gear-driven) DA, and mini polishers as recommended tools.
How to Use
Step 1: Complete any cutting or polishing steps first, then wipe the panel clean so leftover compound doesn't contaminate the finishing step.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.
Step 4: Work one small section at a time with slow, overlapping passes and light, even pressure, keeping the pad flat.
Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.
Pro Tip: Keep a dedicated set of black pads for finishing only. Using them with heavier compounds can leave residue in the foam that works against a clean final finish.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The finishing step is where a correction job looks finished. The Black Flat gives you a smooth, predictable finishing pad that works across DA, gear-driven, and mini polishers.
Works Best With
✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.
✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.
✅ Lake Country Orange Flat Light Cutting Pad – The flat light cutting pad, for the step before finishing.
✅ Lake Country CCS Black Finishing Pad – The CCS version of this pad, with pockets that release polish gradually.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How do the flat pad colors compare?
💡 Answer: Lake Country lists four colors in its smooth surface line: Yellow Cutting, Orange Light Cutting, White Heavy Polishing, and Black Finishing.
❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA, forced (gear-driven) DA, and mini polishers.
❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"
🛠 Material: Smooth surface urethane foam, thin and tapered with exact-fit backing
🚗 Application Type: Finishing
⚙️ Machine Compatibility: Random orbital DA, forced DA, and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Black Flat Foam Finishing Pad is a smooth surface finishing pad made for DA, gear-driven, and mini polishers. Use it as the final polishing step for maximum gloss.
Key Features & Benefits
🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive color in its smooth surface line.
🔹 Smooth Surface Foam – Lake Country builds its flat foam pads from unique urethane foam formulations, with a smooth working face.
🔹 Thin, Tapered, Exact-Fit Design – Lake Country designs its smooth surface pads with a thin, tapered profile and an exact-fit backing to optimize performance.
🔹 Works on DA, Gear-Driven, and Mini Polishers – Lake Country lists random orbital DA, forced (gear-driven) DA, and mini polishers as recommended tools.
How to Use
Step 1: Complete any cutting or polishing steps first, then wipe the panel clean so leftover compound doesn't contaminate the finishing step.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.
Step 4: Work one small section at a time with slow, overlapping passes and light, even pressure, keeping the pad flat.
Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.
Pro Tip: Keep a dedicated set of black pads for finishing only. Using them with heavier compounds can leave residue in the foam that works against a clean final finish.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The finishing step is where a correction job looks finished. The Black Flat gives you a smooth, predictable finishing pad that works across DA, gear-driven, and mini polishers.
Works Best With
✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.
✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.
✅ Lake Country Orange Flat Light Cutting Pad – The flat light cutting pad, for the step before finishing.
✅ Lake Country CCS Black Finishing Pad – The CCS version of this pad, with pockets that release polish gradually.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How do the flat pad colors compare?
💡 Answer: Lake Country lists four colors in its smooth surface line: Yellow Cutting, Orange Light Cutting, White Heavy Polishing, and Black Finishing.
❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA, forced (gear-driven) DA, and mini polishers.
❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"
🛠 Material: Smooth surface urethane foam, thin and tapered with exact-fit backing
🚗 Application Type: Finishing
⚙️ Machine Compatibility: Random orbital DA, forced DA, and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.