The Lake Country SDO CCS Black Finishing Foam Pad combines Lake Country's Standard Duty Orbital (SDO) design for DA polishers with its patented CCS foam technology. It's the finishing pad in the SDO CCS line, for refining paint to its final gloss.

Video Demonstration

Key Features & Benefits

🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive of the three SDO CCS pads.

🔹 Same Foams as HDO CCS – Lake Country builds SDO CCS pads with the same engineered foams as its HDO CCS line, without the HDO dual-layer construction.

🔹 CCS Technology – Conventional foam pads absorb polish too quickly, trapping most of it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells to slow that absorption.

🔹 Gradual Polish Release – CCS pockets release polish gradually as you work, extending working time and improving control.

🔹 Prevents Pad Skipping – The pockets reduce surface tension so the pad runs flat on the paint.

🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating on curved and contoured panels.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat so it keeps rotating.

Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.

Pro Tip: Because CCS pads release product gradually, start with less compound or polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

A finishing pad has to run smooth, stay flat, and keep the polish working long enough to break down fully. The SDO CCS Black does that on a standard DA, with CCS cells that release polish gradually.

Works Best With

✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.

✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.

✅ Lake Country SDO CCS Orange Polishing Pad – The polishing pad in the same SDO CCS line, for the step before finishing.

✅ Lake Country SDO Black Finishing Pad – The standard (non-CCS) version of this pad.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: What does CCS do?
💡 Answer: CCS uses patterns of partially closed foam cells that slow how quickly the pad absorbs polish, release it gradually as you work, and help the pad run flat without skipping.

❓ Question: How is this different from the standard SDO Black pad?
💡 Answer: Both are SDO finishing pads. The CCS version adds CCS cell technology for slower polish absorption and longer working time.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA and mini polishers.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: CCS foam with tapered edge

🚗 Application Type: Finishing

⚙️ Machine Compatibility: Random orbital DA and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Sale

Lake Country SDO CCS Black Finishing Foam Pad 3.5, 5.5, 6.5 -Inch — Finishing Foam Polishing Pad

SKU: SDO-72350-CCS
Regular price $6.25
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country SDO CCS Black Finishing Foam Pad combines Lake Country's Standard Duty Orbital (SDO) design for DA polishers with its patented CCS foam technology. It's the finishing pad in the SDO CCS line, for refining paint to its final gloss.

Video Demonstration

Key Features & Benefits

🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive of the three SDO CCS pads.

🔹 Same Foams as HDO CCS – Lake Country builds SDO CCS pads with the same engineered foams as its HDO CCS line, without the HDO dual-layer construction.

🔹 CCS Technology – Conventional foam pads absorb polish too quickly, trapping most of it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells to slow that absorption.

🔹 Gradual Polish Release – CCS pockets release polish gradually as you work, extending working time and improving control.

🔹 Prevents Pad Skipping – The pockets reduce surface tension so the pad runs flat on the paint.

🔹 Tapered Edge – The tapered profile resists pad rolling and keeps the pad rotating on curved and contoured panels.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat so it keeps rotating.

Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.

Pro Tip: Because CCS pads release product gradually, start with less compound or polish than you would on a standard foam pad. Add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

A finishing pad has to run smooth, stay flat, and keep the polish working long enough to break down fully. The SDO CCS Black does that on a standard DA, with CCS cells that release polish gradually.

Works Best With

✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.

✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.

✅ Lake Country SDO CCS Orange Polishing Pad – The polishing pad in the same SDO CCS line, for the step before finishing.

✅ Lake Country SDO Black Finishing Pad – The standard (non-CCS) version of this pad.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: What does CCS do?
💡 Answer: CCS uses patterns of partially closed foam cells that slow how quickly the pad absorbs polish, release it gradually as you work, and help the pad run flat without skipping.

❓ Question: How is this different from the standard SDO Black pad?
💡 Answer: Both are SDO finishing pads. The CCS version adds CCS cell technology for slower polish absorption and longer working time.

❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA and mini polishers.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: CCS foam with tapered edge

🚗 Application Type: Finishing

⚙️ Machine Compatibility: Random orbital DA and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.