The Lake Country Rotary Backing Plate 3 Inch is a 73mm (2-7/8") flexible-edge urethane backing plate for rotary polishers, with a plated steel threaded insert. It holds 3-inch class hook-and-loop wool and foam pads for spot work and tight areas.
Key Features & Benefits
🔹 High Strength Molded Urethane – Lake Country says the urethane helps absorb the heat created while polishing, while staying flexible over the buffing surface.
🔹 Plated Steel Insert – The plated steel threaded insert is built to withstand rotary machine use.
🔹 Flexible Edge – Lake Country describes these as flexible edge plates.
🔹 Grip Easy Edge – The edge is designed for fast and easy pad changes.
How to Use
Step 1: Confirm the plate's thread matches your rotary's spindle before installing.
Step 2: Unplug the polisher or remove the battery. Remove the old backing plate following your polisher's instructions.
Step 3: Thread the Lake Country plate onto the spindle until it is snug.
Step 4: Center a pad that is at least as large as the plate on the hook-and-loop face, such as a 3.25-inch wool pad.
Step 5: To change pads, use the Grip Easy Edge to peel the pad off, then center the next one.
Pro Tip: Lake Country recommends always using a pad that is at least the size of the backing plate, so the plate edge never touches the paint.
Care
Keep the hook-and-loop face clean of pad fibers and dried compound so pads hold securely and stay centered. Wipe the plate down after each job.
Why We Love It
A small rotary plate puts fast wool cutting where a full-size pad can't fit, like bumpers, pillars, and body lines. Lake Country's plate pairs a flexible urethane body with a plated steel insert made for rotary use.
Works Best With
✅ Lake Country Blue Hybrid Wool Cutting Pad – A heavy cutting wool pad for rotary and gear-driven polishers. The 3.25-inch size fits this plate.
✅ Lake Country Purple Foamed Wool Pad – Lake Country's foamed wool cutting pad for rotary and forced DA use.
✅ Lake Country Low Lint Wool Cutting Pad – A low-lint knitted wool pad that Lake Country lists for rotary polishers.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country lists it for rotary polishers as well as DAs, for cleaning pads on the machine.
Frequently Asked Questions
❓ Question: What size pads can I use?
💡 Answer: Use pads at least as large as the 2-7/8" plate, such as 3.25-inch or 3.5-inch pads.
❓ Question: What thread size is it?
💡 Answer: Lake Country makes its rotary backing plates in 5/8"-11 and metric threads. Contact us before ordering if you need to confirm the thread for your polisher.
❓ Question: Can I use it on a DA polisher?
💡 Answer: Lake Country lists this plate for rotary polishers. For a random orbital DA, use the Lake Country DA Backing Plate.
Technical Specifications
📏 Plate Size: 73mm (2-7/8")
🛠 Material: High strength molded urethane with a plated steel threaded insert
⚙️ Machine Compatibility: Rotary polishers
🔗 Attachment: Hook-and-loop face
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Rotary Backing Plate 3 Inch is a 73mm (2-7/8") flexible-edge urethane backing plate for rotary polishers, with a plated steel threaded insert. It holds 3-inch class hook-and-loop wool and foam pads for spot work and tight areas.
Key Features & Benefits
🔹 High Strength Molded Urethane – Lake Country says the urethane helps absorb the heat created while polishing, while staying flexible over the buffing surface.
🔹 Plated Steel Insert – The plated steel threaded insert is built to withstand rotary machine use.
🔹 Flexible Edge – Lake Country describes these as flexible edge plates.
🔹 Grip Easy Edge – The edge is designed for fast and easy pad changes.
How to Use
Step 1: Confirm the plate's thread matches your rotary's spindle before installing.
Step 2: Unplug the polisher or remove the battery. Remove the old backing plate following your polisher's instructions.
Step 3: Thread the Lake Country plate onto the spindle until it is snug.
Step 4: Center a pad that is at least as large as the plate on the hook-and-loop face, such as a 3.25-inch wool pad.
Step 5: To change pads, use the Grip Easy Edge to peel the pad off, then center the next one.
Pro Tip: Lake Country recommends always using a pad that is at least the size of the backing plate, so the plate edge never touches the paint.
Care
Keep the hook-and-loop face clean of pad fibers and dried compound so pads hold securely and stay centered. Wipe the plate down after each job.
Why We Love It
A small rotary plate puts fast wool cutting where a full-size pad can't fit, like bumpers, pillars, and body lines. Lake Country's plate pairs a flexible urethane body with a plated steel insert made for rotary use.
Works Best With
✅ Lake Country Blue Hybrid Wool Cutting Pad – A heavy cutting wool pad for rotary and gear-driven polishers. The 3.25-inch size fits this plate.
✅ Lake Country Purple Foamed Wool Pad – Lake Country's foamed wool cutting pad for rotary and forced DA use.
✅ Lake Country Low Lint Wool Cutting Pad – A low-lint knitted wool pad that Lake Country lists for rotary polishers.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country lists it for rotary polishers as well as DAs, for cleaning pads on the machine.
Frequently Asked Questions
❓ Question: What size pads can I use?
💡 Answer: Use pads at least as large as the 2-7/8" plate, such as 3.25-inch or 3.5-inch pads.
❓ Question: What thread size is it?
💡 Answer: Lake Country makes its rotary backing plates in 5/8"-11 and metric threads. Contact us before ordering if you need to confirm the thread for your polisher.
❓ Question: Can I use it on a DA polisher?
💡 Answer: Lake Country lists this plate for rotary polishers. For a random orbital DA, use the Lake Country DA Backing Plate.
Technical Specifications
📏 Plate Size: 73mm (2-7/8")
🛠 Material: High strength molded urethane with a plated steel threaded insert
⚙️ Machine Compatibility: Rotary polishers
🔗 Attachment: Hook-and-loop face
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.