The Lake Country Microfiber One-Step Cutting Pad is a light cutting microfiber pad with an orange foam interface, made for DA polishers. It's built for one-step jobs, where you want to remove defects and finish in a single pass.
Video Demonstration
Key Features & Benefits
🔹 Light Cutting Microfiber – Lake Country lists this pad as Light Cutting Fiber with an orange foam interface, and calls it its "one-step" option: the closest you can get to an all-in-one buffing pad.
🔹 Precision Sizing – Each pad is sized to minimize overhang for precise polishing and even pressure.
🔹 Purpose-Matched Foam – Lake Country optimizes the foam density for each microfiber pad's purpose, for durability and a balanced feel.
🔹 Short-Pile Fibers for Orbital Machines – Short microfiber strands are designed to work with the tighter motion of orbital polishers.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Use the 3.25-inch pad on a 3-inch backing plate, the 5.25-inch on a 5-inch, or the 6.25-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad by working a light, even coat of a one-step compound or polish into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat.
Step 5: Wipe off residue and inspect. On soft or dark paint, follow with a foam finishing pad if you see light haze.
Pro Tip: Lake Country recommends cleaning microfiber pads with compressed air, using a blow gun or tornado-style tool. Always wear a dust mask or respirator and eye protection when you do.
Pad Care
When you finish, blow the pad out with compressed air or brush out the fibers. Then wash it in a pad washer, or in a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink the hook-and-loop backing. Always let pads air dry.
Why We Love It
Most cars don't need a full multi-step correction. The Microfiber One-Step is Lake Country's answer for those jobs: enough cut to remove typical wash marring, with a finish good enough to stop after one pass.
Works Best With
✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.
✅ Koch Chemie One Cut & Finish P6.02 – A one-step cutting compound and finishing polish for DA polishers.
✅ Lake Country Microfiber Cutting Pad – The white microfiber cutting pad, for heavier defects than a one-step pad can handle.
✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A random orbital DA polisher. Pair it with the 5.25-inch pad.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: What does "one-step" mean for this pad?
💡 Answer: Lake Country calls it its one-step option, the closest thing to an all-in-one buffing pad. It's meant to remove defects and finish in a single pass.
❓ Question: How is it different from the Microfiber Cutting Pad?
💡 Answer: The white Microfiber Cutting Pad is built for heavier cutting. The One-Step uses light cutting fiber on an orange foam interface, for jobs where you want to correct and finish in one pass.
❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA polishers, and designs its microfiber pads for orbital and forced-rotation polishers.
❓ Question: What size backing plate do I need?
💡 Answer: Use a plate no larger than the pad: 3-inch for the 3.25-inch pad, 5-inch for the 5.25-inch, and 6-inch for the 6.25-inch.
Technical Specifications
📏 Pad Size: 3.25", 5.25", and 6.25" diameter (sold in singles and multi-packs)
🔧 Backing Plate: Use a plate no larger than the pad (3", 5", or 6")
🛠 Material: Light cutting microfiber on an orange foam interface
🚗 Application Type: One-step correction
⚙️ Machine Compatibility: Random orbital DA and forced-rotation orbital polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Microfiber One-Step Cutting Pad is a light cutting microfiber pad with an orange foam interface, made for DA polishers. It's built for one-step jobs, where you want to remove defects and finish in a single pass.
Video Demonstration
Key Features & Benefits
🔹 Light Cutting Microfiber – Lake Country lists this pad as Light Cutting Fiber with an orange foam interface, and calls it its "one-step" option: the closest you can get to an all-in-one buffing pad.
🔹 Precision Sizing – Each pad is sized to minimize overhang for precise polishing and even pressure.
🔹 Purpose-Matched Foam – Lake Country optimizes the foam density for each microfiber pad's purpose, for durability and a balanced feel.
🔹 Short-Pile Fibers for Orbital Machines – Short microfiber strands are designed to work with the tighter motion of orbital polishers.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Use the 3.25-inch pad on a 3-inch backing plate, the 5.25-inch on a 5-inch, or the 6.25-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad by working a light, even coat of a one-step compound or polish into the fibers, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes, keeping the pad flat.
Step 5: Wipe off residue and inspect. On soft or dark paint, follow with a foam finishing pad if you see light haze.
Pro Tip: Lake Country recommends cleaning microfiber pads with compressed air, using a blow gun or tornado-style tool. Always wear a dust mask or respirator and eye protection when you do.
Pad Care
When you finish, blow the pad out with compressed air or brush out the fibers. Then wash it in a pad washer, or in a washing machine on a gentle cycle with cold or warm water, no more than 10 pads at a time. Hot water can shrink the hook-and-loop backing. Always let pads air dry.
Why We Love It
Most cars don't need a full multi-step correction. The Microfiber One-Step is Lake Country's answer for those jobs: enough cut to remove typical wash marring, with a finish good enough to stop after one pass.
Works Best With
✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.
✅ Koch Chemie One Cut & Finish P6.02 – A one-step cutting compound and finishing polish for DA polishers.
✅ Lake Country Microfiber Cutting Pad – The white microfiber cutting pad, for heavier defects than a one-step pad can handle.
✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A random orbital DA polisher. Pair it with the 5.25-inch pad.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: What does "one-step" mean for this pad?
💡 Answer: Lake Country calls it its one-step option, the closest thing to an all-in-one buffing pad. It's meant to remove defects and finish in a single pass.
❓ Question: How is it different from the Microfiber Cutting Pad?
💡 Answer: The white Microfiber Cutting Pad is built for heavier cutting. The One-Step uses light cutting fiber on an orange foam interface, for jobs where you want to correct and finish in one pass.
❓ Question: What machines can I use it on?
💡 Answer: Lake Country lists random orbital DA polishers, and designs its microfiber pads for orbital and forced-rotation polishers.
❓ Question: What size backing plate do I need?
💡 Answer: Use a plate no larger than the pad: 3-inch for the 3.25-inch pad, 5-inch for the 5.25-inch, and 6-inch for the 6.25-inch.
Technical Specifications
📏 Pad Size: 3.25", 5.25", and 6.25" diameter (sold in singles and multi-packs)
🔧 Backing Plate: Use a plate no larger than the pad (3", 5", or 6")
🛠 Material: Light cutting microfiber on an orange foam interface
🚗 Application Type: One-step correction
⚙️ Machine Compatibility: Random orbital DA and forced-rotation orbital polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.