The Lake Country HDO CCS Black Finishing Pad combines Lake Country's Heavy Duty Orbital (HDO) design for long-throw polishers with its patented CCS foam technology. It's the finishing pad in the HDO CCS line, for refining paint to its final gloss.

Video Demonstration

Key Features & Benefits

🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive of the three HDO CCS pads.

🔹 CCS Technology – Conventional foam pads absorb polish too quickly, trapping most of it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells to slow that absorption.

🔹 Gradual Polish Release – CCS pockets release polish gradually as you work, extending working time and improving control during the finishing pass.

🔹 Runs Flat, Runs Cooler – The pockets reduce surface tension and friction so the pad runs flat without skipping and creates less friction heat.

🔹 Dual-Layer HDO Design with Tapered Edge – The dual-layer construction reduces internal movement, and the tapered edge resists pad rolling on curved and contoured panels.

How to Use

Step 1: Complete any cutting or polishing steps first, then wipe the panel clean so leftover compound doesn't contaminate the finishing step.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.

Step 4: Work one small section at a time with slow, overlapping passes and light, even pressure, keeping the pad flat.

Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.

Pro Tip: Because CCS pads release product gradually, a small amount of finishing polish goes a long way. Start light and add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

A finishing pad has to run smooth, stay flat, and keep the polish working long enough to break down fully. The HDO CCS Black is built for that on a long-throw machine, with CCS cells that release polish gradually and the HDO design's tapered, dual-layer build.

Works Best With

✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.

✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.

✅ Lake Country HDO CCS Orange Polishing Pad – The polishing pad in the same HDO CCS line, for the step before finishing.

✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A 15mm long-throw orbital polisher. Pair it with the 5.5-inch pad.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer for keeping finishing pads clean.

Frequently Asked Questions

❓ Question: What does CCS do?
💡 Answer: CCS uses patterns of partially closed foam cells that slow how quickly the pad absorbs polish, release it gradually as you work, help the pad run flat without skipping, and reduce friction heat.

❓ Question: How is this different from the standard HDO Black Finishing Pad?
💡 Answer: Both share the HDO dual-layer, tapered design for long-throw polishers. The CCS version adds CCS cell technology for slower polish absorption and longer working time.

❓ Question: How does the Black compare to the other HDO CCS colors?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing. Black is the least aggressive and is used for final refinement.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Dual-layer CCS foam with tapered edge

🚗 Application Type: Finishing

⚙️ Machine Compatibility: Long-throw orbital, random orbital DA, and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Sale

Lake Country HDO CCS Black Finishing Foam Pad 3.5, 5.5, 6.5 -Inch — Finishing Foam Polishing Pad

SKU: HDO-73350-CCS-LC
Regular price $9.99
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country HDO CCS Black Finishing Pad combines Lake Country's Heavy Duty Orbital (HDO) design for long-throw polishers with its patented CCS foam technology. It's the finishing pad in the HDO CCS line, for refining paint to its final gloss.

Video Demonstration

Key Features & Benefits

🔹 Finishing Foam – Lake Country rates black as Finishing, the least aggressive of the three HDO CCS pads.

🔹 CCS Technology – Conventional foam pads absorb polish too quickly, trapping most of it below the working surface. Lake Country's patented CCS design uses patterns of partially closed foam cells to slow that absorption.

🔹 Gradual Polish Release – CCS pockets release polish gradually as you work, extending working time and improving control during the finishing pass.

🔹 Runs Flat, Runs Cooler – The pockets reduce surface tension and friction so the pad runs flat without skipping and creates less friction heat.

🔹 Dual-Layer HDO Design with Tapered Edge – The dual-layer construction reduces internal movement, and the tapered edge resists pad rolling on curved and contoured panels.

How to Use

Step 1: Complete any cutting or polishing steps first, then wipe the panel clean so leftover compound doesn't contaminate the finishing step.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of finishing polish, then add a few small drops for the first section.

Step 4: Work one small section at a time with slow, overlapping passes and light, even pressure, keeping the pad flat.

Step 5: Wipe off residue with a clean microfiber towel and inspect under good lighting.

Pro Tip: Because CCS pads release product gradually, a small amount of finishing polish goes a long way. Start light and add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

A finishing pad has to run smooth, stay flat, and keep the polish working long enough to break down fully. The HDO CCS Black is built for that on a long-throw machine, with CCS cells that release polish gradually and the HDO design's tapered, dual-layer build.

Works Best With

✅ Sonax Perfect Finish – A finishing polish designed to be used with a less aggressive foam or microfiber finishing pad.

✅ Koch Chemie Micro Cut M3.02 – An ultra-fine finishing compound made for use on a soft foam finishing pad as the last step after correction.

✅ Lake Country HDO CCS Orange Polishing Pad – The polishing pad in the same HDO CCS line, for the step before finishing.

✅ Rupes BigFoot LHR15 Mark V Random Orbital Polisher – A 15mm long-throw orbital polisher. Pair it with the 5.5-inch pad.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer for keeping finishing pads clean.

Frequently Asked Questions

❓ Question: What does CCS do?
💡 Answer: CCS uses patterns of partially closed foam cells that slow how quickly the pad absorbs polish, release it gradually as you work, help the pad run flat without skipping, and reduce friction heat.

❓ Question: How is this different from the standard HDO Black Finishing Pad?
💡 Answer: Both share the HDO dual-layer, tapered design for long-throw polishers. The CCS version adds CCS cell technology for slower polish absorption and longer working time.

❓ Question: How does the Black compare to the other HDO CCS colors?
💡 Answer: Lake Country lists Blue as Heavy Polishing, Orange as Polishing, and Black as Finishing. Black is the least aggressive and is used for final refinement.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Dual-layer CCS foam with tapered edge

🚗 Application Type: Finishing

⚙️ Machine Compatibility: Long-throw orbital, random orbital DA, and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

  • 5 stars: 2 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
B
Brian

The king of pads

M
Michael H. (United States)

Great pad, used on my second pass polishing