The Lake Country Force Red Waxing Pad is the waxing pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it to apply waxes, sealants, and polish-and-seal products after your paint is corrected.

Video Demonstration

Key Features & Benefits

🔹 Waxing Foam – Lake Country rates this pad as Waxing, the gentlest pad in the Force line.

🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.

🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.

🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Apply a small amount of wax or sealant to the pad face and spread it evenly.

Step 4: Spread the product in thin, even, overlapping passes with light pressure.

Step 5: Let the product cure according to its label, then remove it with a clean microfiber towel.

Pro Tip: Thin coats work best. Force foam keeps product at the surface, so you need only a small amount to cover a panel evenly.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Protection is the last step, and it goes on more evenly by machine. The Force Red gives forced-rotation users a dedicated waxing pad in the same hybrid foam as the rest of the line.

Works Best With

✅ Rupes Uno Protect – A one-step polish and sealant compatible with random orbital, gear-driven, and rotary movements.

✅ Koch Chemie Micro Cut & Finish P3.01 – A high-gloss polish that leaves a sealant layer, for rotary or DA polishers.

✅ Lake Country Force Black Finishing Pad – The Force finishing pad, for the step before protection.

✅ Lake Country Force Red Waxing Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.

❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Force hybrid foam with buff-backed design

🚗 Application Type: Waxing and sealant application

⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Sale

Lake Country Force Red Waxing Pad 3.5, 5.5, 6.5 -Inch — LSP Application Pad for Wax & Sealant

SKU: FORCE-12350-LC
Regular price $5.99 $4.99 17% off
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country Force Red Waxing Pad is the waxing pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it to apply waxes, sealants, and polish-and-seal products after your paint is corrected.

Video Demonstration

Key Features & Benefits

🔹 Waxing Foam – Lake Country rates this pad as Waxing, the gentlest pad in the Force line.

🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.

🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.

🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Apply a small amount of wax or sealant to the pad face and spread it evenly.

Step 4: Spread the product in thin, even, overlapping passes with light pressure.

Step 5: Let the product cure according to its label, then remove it with a clean microfiber towel.

Pro Tip: Thin coats work best. Force foam keeps product at the surface, so you need only a small amount to cover a panel evenly.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Protection is the last step, and it goes on more evenly by machine. The Force Red gives forced-rotation users a dedicated waxing pad in the same hybrid foam as the rest of the line.

Works Best With

✅ Rupes Uno Protect – A one-step polish and sealant compatible with random orbital, gear-driven, and rotary movements.

✅ Koch Chemie Micro Cut & Finish P3.01 – A high-gloss polish that leaves a sealant layer, for rotary or DA polishers.

✅ Lake Country Force Black Finishing Pad – The Force finishing pad, for the step before protection.

✅ Lake Country Force Red Waxing Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.

❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Force hybrid foam with buff-backed design

🚗 Application Type: Waxing and sealant application

⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.