The Lake Country Force Orange Cutting Pad is the cutting pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it for defect removal that doesn't call for the heavier Grey pad.
Video Demonstration
Key Features & Benefits
🔹 Cutting Foam – Lake Country rates this pad as Cutting, the second most aggressive Force pad, between Grey Heavy Cutting and White Polishing.
🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.
🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.
🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad with a light, even coat of compound across the face, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes and even pressure.
Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with a Force White or Black pad to refine the finish.
Pro Tip: Lake Country recommends testing with a mid-level pad first. On many jobs the Force Orange is that starting point; step up to the Grey only if it doesn't remove enough.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The Force Orange gives forced-rotation users real cutting ability in a pad that's less aggressive than the Grey. Its dense hybrid foam keeps compound at the surface, so correction goes faster with less product.
Works Best With
✅ Koch Chemie One Cut & Finish P6.02 – A cutting compound and polish Koch Chemie recommends with medium-cut foam pads on rotary and DA polishers.
✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.
✅ Lake Country Force White Polishing Pad – The next Force pad down, for polishing after the Orange.
✅ Lake Country Force Orange Cutting Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.
❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.
❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"
🛠 Material: Force hybrid foam with buff-backed design
🚗 Application Type: Cutting
⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.
The Lake Country Force Orange Cutting Pad is the cutting pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it for defect removal that doesn't call for the heavier Grey pad.
Video Demonstration
Key Features & Benefits
🔹 Cutting Foam – Lake Country rates this pad as Cutting, the second most aggressive Force pad, between Grey Heavy Cutting and White Polishing.
🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.
🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.
🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.
How to Use
Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.
Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.
Step 3: Prime the pad with a light, even coat of compound across the face, then add a few small drops for the first section.
Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes and even pressure.
Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with a Force White or Black pad to refine the finish.
Pro Tip: Lake Country recommends testing with a mid-level pad first. On many jobs the Force Orange is that starting point; step up to the Grey only if it doesn't remove enough.
Pad Care
Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.
Why We Love It
The Force Orange gives forced-rotation users real cutting ability in a pad that's less aggressive than the Grey. Its dense hybrid foam keeps compound at the surface, so correction goes faster with less product.
Works Best With
✅ Koch Chemie One Cut & Finish P6.02 – A cutting compound and polish Koch Chemie recommends with medium-cut foam pads on rotary and DA polishers.
✅ Sonax Cut & Finish – A compound designed to cut and polish in the same step, with a long working time.
✅ Lake Country Force White Polishing Pad – The next Force pad down, for polishing after the Orange.
✅ Lake Country Force Orange Cutting Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.
✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.
Frequently Asked Questions
❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.
❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.
❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.
Technical Specifications
📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)
🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"
🛠 Material: Force hybrid foam with buff-backed design
🚗 Application Type: Cutting
⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers
🔗 Attachment: Hook and loop
Warranty Information
Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.