The Lake Country Force Grey Heavy Cutting Pad is the most aggressive pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it for heavy defect removal before stepping down to a polishing pad.

Video Demonstration

Key Features & Benefits

🔹 Heavy Cutting Foam – Lake Country rates this pad as Heavy Cutting, the most aggressive of the five Force pads.

🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.

🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.

🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of compound across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes and even pressure.

Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with a Force Orange or White pad to refine the finish.

Pro Tip: Because Force foam keeps product at the surface, start with a small amount of compound and add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Forced-rotation polishers keep the pad turning under pressure, and Force foam is built for that motion. The Grey is the heavy hitter of the line, with a dense hybrid foam that keeps compound working at the surface for faster correction.

Works Best With

✅ Koch Chemie Heavy Cut H9.02 – An extreme-cut compound Koch Chemie recommends with heavy foam cutting pads, on rotary or DA polishers.

✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound originally designed for rotary use, for this pad's heavy-correction role.

✅ Lake Country Force Orange Cutting Pad – The next Force pad down, for refining after the Grey.

✅ Lake Country Force Grey Heavy Cutting Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.

❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Force hybrid foam with buff-backed design

🚗 Application Type: Heavy cutting

⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E

Lake Country Force Grey Heavy Cutting Foam Pad 3.5, 5.5, 6.5 -Inch — Aggressive Paint Correction Pad

SKU: FORCE-72350G-LC
Regular price $5.99
Unit price
per 

Free shipping over $149 (some restrictions apply)

Earn Reward Points With Every Order

Shipping calculated at checkout.
100% Secure payments

Your details are protected and safe with us.

Ach Direct Debit
Amazon
American Express
Apple Pay
Bizum
Diners Club
Discover
Google Pay
Mastercard
PayPal
Satispay
Shop Pay
USDC
Visa

The Lake Country Force Grey Heavy Cutting Pad is the most aggressive pad in Lake Country's Force line of hybrid foam pads, engineered for forced-rotation (gear-driven) polishers. Use it for heavy defect removal before stepping down to a polishing pad.

Video Demonstration

Key Features & Benefits

🔹 Heavy Cutting Foam – Lake Country rates this pad as Heavy Cutting, the most aggressive of the five Force pads.

🔹 Force Hybrid Foam – Lake Country engineers Force hybrid foams with small cells and a dense, robust construction to maximize performance on forced-rotation polishers.

🔹 Keeps Product at the Surface – The dense hybrid foam keeps abrasives and chemicals close to the pad surface, so more product stays where the work happens. Lake Country says that means less polish and quicker results.

🔹 Buff-Backed Design – A buffed backing protects the backing plate from contact with the paint while keeping pressure consistent across the pad.

How to Use

Step 1: Wash and decontaminate the paint, then inspect it under good lighting. Tape off trim, badges, and sharp body lines.

Step 2: Use the 3.5-inch pad on a 3-inch backing plate, the 5.5-inch on a 5-inch, or the 6.5-inch on a 6-inch. Center the pad on the hook-and-loop plate.

Step 3: Prime the pad with a light, even coat of compound across the face, then add a few small drops for the first section.

Step 4: Test a small area first. Work one small section at a time with slow, overlapping passes and even pressure.

Step 5: Wipe off residue with a clean microfiber towel and inspect. Follow with a Force Orange or White pad to refine the finish.

Pro Tip: Because Force foam keeps product at the surface, start with a small amount of compound and add more only when the pad starts to run dry.

Pad Care

Lake Country recommends washing foam pads in a pad washer with a pad cleaning powder, rinsing with clean water, and air drying. You can also machine wash pads on a gentle cycle in cold or warm water, no more than 10 pads at a time. Avoid hot water, which can shrink the hook-and-loop backing. Don't use a pressure washer or high-pressure compressed air on foam.

Why We Love It

Forced-rotation polishers keep the pad turning under pressure, and Force foam is built for that motion. The Grey is the heavy hitter of the line, with a dense hybrid foam that keeps compound working at the surface for faster correction.

Works Best With

✅ Koch Chemie Heavy Cut H9.02 – An extreme-cut compound Koch Chemie recommends with heavy foam cutting pads, on rotary or DA polishers.

✅ CarPro UltraCut Extreme Cut Compound – A heavy-cut compound originally designed for rotary use, for this pad's heavy-correction role.

✅ Lake Country Force Orange Cutting Pad – The next Force pad down, for refining after the Grey.

✅ Lake Country Force Grey Heavy Cutting Micro Pads – The 1-inch and 2-inch version of this pad, for tight areas.

✅ Lake Country System 4000 DA Orbital Pad Washer – Lake Country's pad washer, the cleaning method it recommends.

Frequently Asked Questions

❓ Question: How do the Force colors compare?
💡 Answer: Lake Country lists five Force pads, from most to least aggressive: Grey Heavy Cutting, Orange Cutting, White Polishing, Black Finishing, and Red Waxing.

❓ Question: What machines are Force pads for?
💡 Answer: Lake Country lists forced (gear-driven) dual action polishers and mini polishers as the recommended tools. Force foam is engineered specifically for forced-rotation machines.

❓ Question: What size backing plate do I need?
💡 Answer: 3-inch for the 3.5-inch pad, 5-inch for the 5.5-inch, and 6-inch for the 6.5-inch.

Technical Specifications

📏 Pad Size: 3.5", 5.5", and 6.5" diameter (sold in singles and multi-packs)

🔧 Backing Plate: 3.5" pad fits a 3" plate; 5.5" fits 5"; 6.5" fits 6"

🛠 Material: Force hybrid foam with buff-backed design

🚗 Application Type: Heavy cutting

⚙️ Machine Compatibility: Forced (gear-driven) dual action and mini polishers

🔗 Attachment: Hook and loop

Warranty Information

Lake Country Manufacturing warrants its products against manufacturing defects in materials and workmanship for 60 days from the date of purchase, unless otherwise stated on the product. Normal wear and tear, improper use, and abuse are not covered. To make a claim, contact Car Supplies Warehouse with your proof of purchase and a description of the defect.