UNLOCK THE PROTECTIVE POWER OF PPF
Paint protection film is one of the best available methods to protect the exterior of any car, shielding surfaces from rock chips and other physical damage, things that chemical protectants can't guard against. For those who own their own business, Paint Protection Film installation is a highly profitable service, attracting a high class clientele and fetching a significant labor cost when installed by a knowledgeable technician. Car Supplies Warehouse's Paint Protection Film kits are simple DIY solutions that help you unlock the world of paint protection film as an enthusiast or as a business owner. We're here to help guide you through the process, and to help you ensure that every surface is beautifully protected.
HOW TO INSTALL PAINT PROTECTION FILM
Before performing any of these steps, be sure the vehicle is cleaned and dry.
1: Prep the surface. Using the “Tack” solution provided in the kit, prep the work area making sure it’s clean.
2: Remove the film from the liner.
3: Spray the provided “Slip” solution on the back (sticky side) of the film.
4: Place the film on the work area.
5: Align the piece of film to fit the work area perfectly.
6: Spray tack solution in the top right corner.
7: Using the provided squeegee, squeegee out the tack solution from the center of the working area, working your way from center to the edges.
8: Stretch the film to align the other corners that were not previously tack’d.
9: Repeat step 6-8 in the other corners, in this order… bottom left, bottom right, top left.
10: Once all the corners are “tack’d”, you can begin to squeege out the moisture from the center, working your way to the edges.
11: Wipe off the excess moisture that’s sitting on top of the film, step back and enjoy your newly protected panel.
Shop Paint Protection Film Here:
INSERT HTML FOR MAKE MODEL AND YEAR DROPDOWNS HERE
Do you have all the tools you need to properly install paint protection film? Check out our PPF installation tools here: