With GLISS, CARPRO brought new advances in nanotechnology to bare and designed an all-new hyper- smooth, hyper-glossy, and easy to apply ceramic nanocoating that excels as a top-coat for all CQUARTZ coatings!
Utilizing modified long chain carbon-fluorine polymers and enhanced nano-technology, GLISS provides increased resistance to, static buildup, dust retention, and many types of mineral and water stains.
Features:
Slick and Hyper smooth
Easy to use!
Industry-leading sliding angle!
Also works great as a stand-alone nano-coat!
Anti-static: Non-oily / resists dust retention
Adds thickness to your existing coat when used as a top coat
Enhances resistance to water spots and mineral stains
Drag two lines of product across length of suede wrapped applicator.
Apply evenly across the surface, approximately 2 ft x 2 ft section at a time. (Any overlap from one section to the next must be within a couple minutes for even application)
Add more product to the applicator as needed to keep a wet, even application.
GLISS will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If haze is left on too long then reapply and immediately wipe off.
If layering on top of itself, wait 1 hour between coats. If IR cured, you may repeat immediately. Total cure time: 6 hours.
For use as a top coat
1. May be applied 4 hours or longer after CQuartz. 2. If IR cured may be applied after 45 minutes from CQuartz application
After Tips:
- Keep surface dry for at least one hour after application - Wipe any water off the surface during the first 24 hours after application - Avoid detergents and chemicals for 5-7 days after application - If it is dry and the air is clean outside then you may park the vehicle in direct sun after the application is complete to hasten cure - To maintain wash regularly with Reset Car Wash or EcH2O Waterless Wash, Rinseless Wash & Quick Detailer Concentrate